Haematology
Horiba
ASTM E1394 / HL7 · RS-232 / TCP/IP
Bidirectional ordering

Connect Your Horiba Yumizen to Any HIS or LIMS

The Horiba Yumizen family covers compact to high-throughput haematology analysers with 5-part differential, widely deployed in hospital and reference labs.

Connect your Yumizen to your HIS or LIMS automatically. LISBridge parses the Yumizen result stream in real time and — on order-capable models — dispatches test orders from your LIS to the analyser, so the worklist is ready before the sample arrives.

Start Free TrialTest Parser Live →
< 30 min
Setup time
ASTM E1394 / HL7
Protocol
RS-232 / TCP/IP
Connection
>99.9%
Parse accuracy

How LISBridge Connects the Horiba Yumizen

01

Connect your instrument

Plug in via RS-232 or point it at LISBridge over TCP/IP. Auto-detection identifies the instrument and loads the correct parser — no manual selection.

02

Parse the data

LISBridge reads the ASTM E1394 / HL7 stream in real time. Every result message is decoded — field by field — into structured data.

03

Validate results

Each result is checked for completeness. Duplicates caught. Malformed messages flagged. Only clean data moves forward.

04

HIS receives clean data

Validated results reach your HIS automatically — as HL7 or direct format. Stored locally too. No manual entry required.

Horiba Yumizen — Frequently Asked Questions

Which Horiba Yumizen models does LISBridge support?

LISBridge supports the Yumizen family including the Yumizen H550. Results parsing and bidirectional order dispatch are both available — the Yumizen is one of LISBridge's 16 order-capable instruments.

Does LISBridge support bidirectional ordering on the Yumizen?

Yes. Test orders created in your LIS are routed to the Yumizen automatically (worklist download), and results flow back the other way in real time.

What parameters does LISBridge extract from the Yumizen?

All CBC parameters reported by the instrument — WBC, RBC, HGB, HCT, MCV, MCH, MCHC, PLT, and the 5-part differential — plus flags and units, delivered to your HIS as structured results.

How long does Yumizen setup take?

Typically under 30 minutes. Connect via RS-232 or TCP/IP, open LISBridge, and the instrument is detected automatically — no custom interface project.

LISBridge supports 35 instruments. See also:

Sysmex XN-550Mindray BC-430Mindray BC-760COBAS C311COBAS E411Horiba Pentra XLRHoriba Pentra 400Horiba Yumizen H550View all 26+ →

Connect your Horiba Yumizen today

Start your free 7-day trial — no credit card required. Full ASTM E1394 / HL7 support from day one.

Start Free TrialTalk to Us →