Plug in via RS-232 or point it at LISBridge over TCP/IP. Auto-detection identifies the instrument and loads the correct parser — no manual selection.
LISBridge reads the ASTM E1394 stream in real time. Every result message is decoded — field by field — into structured data.
Each result is checked for completeness. Duplicates caught. Malformed messages flagged. Only clean data moves forward.
Validated results reach your HIS automatically — as HL7 or direct format. Stored locally too. No manual entry required.
Yes. The BC-760 supports both connection types. LISBridge handles either — or both simultaneously if needed.
Yes. LISBridge extracts full reticulocyte parameters (RET%, RET#, IRF, LFR, MFR, HFR) in addition to the standard 6-part differential when the BC-760 is configured to report them.
Both use Mindray ASTM parsers. The BC-760 parser handles additional parameters (6-part diff, reticulocytes, nucleated RBCs) and TCP/IP connection support not present on the BC-430.
Set the BC-760 host IP to your LISBridge machine's local IP and port to the TCP port configured in LISBridge (default: 5000). LISBridge listens and accepts the connection automatically.
LISBridge supports 35 instruments. See also:
Start your free 7-day trial — no credit card required. Full ASTM E1394 support from day one.