Plug in via RS-232 or point it at LISBridge over TCP/IP. Auto-detection identifies the instrument and loads the correct parser — no manual selection.
LISBridge reads the ASTM E1394 stream in real time. Every result message is decoded — field by field — into structured data.
Each result is checked for completeness. Duplicates caught. Malformed messages flagged. Only clean data moves forward.
Validated results reach your HIS automatically — as HL7 or direct format. Stored locally too. No manual entry required.
The Sysmex XN-550 communicates via ASTM E1394 over RS-232 serial. LISBridge implements the full ENQ/ACK/EOT handshake and parses all H/P/O/R/L record types produced by the XN-550.
LISBridge receives results from the XN-550 (host-push mode) and can optionally receive query responses in host-query mode if your HIS sends HL7 ORM work orders to LISBridge.
Typically under 30 minutes. Plug in the RS-232 cable, open LISBridge, and the XN-550 is detected automatically. The correct ASTM parser loads without manual selection.
Yes. LISBridge is offline-capable. Once activated, it runs on your local machine — no internet required. Results continue flowing to your HIS during outages.
LISBridge supports 35 instruments. See also:
Start your free 7-day trial — no credit card required. Full ASTM E1394 support from day one.