Plug in via RS-232 or point it at LISBridge over TCP/IP. Auto-detection identifies the instrument and loads the correct parser — no manual selection.
LISBridge reads the ASTM E1394 stream in real time. Every result message is decoded — field by field — into structured data.
Each result is checked for completeness. Duplicates caught. Malformed messages flagged. Only clean data moves forward.
Validated results reach your HIS automatically — as HL7 or direct format. Stored locally too. No manual entry required.
LISBridge supports Dymind DH 36 and other models using ASTM E1394 over RS-232. Contact us to confirm your specific model.
Dymind 5-part analysers report WBC, RBC, HGB, HCT, MCV, MCH, MCHC, RDW, PLT, PDW, MPV, and a 5-part differential with absolute and percentage values.
No. Connect the RS-232 cable, open LISBridge, and the Dymind analyser is auto-detected. Setup typically takes under 20 minutes.
Yes — if you have multiple serial ports (or USB-to-RS-232 adapters), LISBridge can connect to multiple Dymind instruments simultaneously.
LISBridge supports 35 instruments. See also:
Start your free 7-day trial — no credit card required. Full ASTM E1394 support from day one.