Haematology
Nihon Kohden
ASTM E1394 · RS-232

Connect Your Celltech G (MEK-9100) to Any HIS or LIMS

The Nihon Kohden MEK-9100 (Celltech G) is a haematology analyser with 5-part differential used in hospital laboratories.

Connect the Celltech G / MEK-9100 to your HIS automatically. LISBridge parses the Nihon Kohden ASTM E1394 stream and delivers CBC results to your HIS without manual entry.

< 30 min
Setup time
ASTM E1394
Protocol
RS-232
Connection
>99.9%
Parse accuracy

How LISBridge Connects the Celltech G (MEK-9100)

01

Connect your instrument

Plug in via RS-232 or point it at LISBridge over TCP/IP. Auto-detection identifies the instrument and loads the correct parser — no manual selection.

02

Parse the data

LISBridge reads the ASTM E1394 stream in real time. Every result message is decoded — field by field — into structured data.

03

Validate results

Each result is checked for completeness. Duplicates caught. Malformed messages flagged. Only clean data moves forward.

04

HIS receives clean data

Validated results reach your HIS automatically — as HL7 or direct format. Stored locally too. No manual entry required.

Celltech G (MEK-9100) — Frequently Asked Questions

What protocol does the Celltech G (MEK-9100) use?

The MEK-9100 uses ASTM E1394 over RS-232. LISBridge includes a Nihon Kohden parser for the MEK series.

What CBC parameters does the MEK-9100 report?

The MEK-9100 reports WBC, RBC, HGB, HCT, MCV, MCH, MCHC, RDW, PLT, MPV, and 5-part differential with absolute and percentage counts.

Does LISBridge support other Nihon Kohden models?

LISBridge supports the MEK-9100 and related models in the Nihon Kohden haematology range. Contact us to confirm your specific model.

How long does setup take for the MEK-9100?

Under 30 minutes. Connect the RS-232 cable and open LISBridge — the MEK-9100 is auto-detected and the correct parser loads.

Connect your Celltech G (MEK-9100) today

Start your free 7-day trial — no credit card required. Full ASTM E1394 support from day one.