Immunoassay
Abbott
ASTM E1394 · TCP/IP
Bidirectional ordering

Connect Your Abbott i800 to Any HIS or LIMS

The Abbott ARCHITECT i800 is a high-throughput immunoassay analyser for hormones, tumour markers, infectious disease, and cardiac panel testing.

Connect the Abbott i800 to your HIS over TCP/IP. LISBridge implements the Abbott ASTM-over-TCP protocol, parses immunoassay results, and forwards to your HIS without manual transcription.

Start Free TrialTest Parser Live →
< 30 min
Setup time
ASTM E1394
Protocol
TCP/IP
Connection
>99.9%
Parse accuracy

How LISBridge Connects the Abbott i800

01

Connect your instrument

Plug in via RS-232 or point it at LISBridge over TCP/IP. Auto-detection identifies the instrument and loads the correct parser — no manual selection.

02

Parse the data

LISBridge reads the ASTM E1394 stream in real time. Every result message is decoded — field by field — into structured data.

03

Validate results

Each result is checked for completeness. Duplicates caught. Malformed messages flagged. Only clean data moves forward.

04

HIS receives clean data

Validated results reach your HIS automatically — as HL7 or direct format. Stored locally too. No manual entry required.

Abbott i800 — Frequently Asked Questions

What protocol does the Abbott i800 use?

The Abbott i800 communicates via ASTM E1394 over TCP/IP (not RS-232). LISBridge connects as a TCP client to the i800 and receives ASTM messages over the network.

Does LISBridge support bidirectional operation with the Abbott i800?

Yes. LISBridge supports the Abbott i800 in bidirectional mode — receiving results from the analyser and optionally sending work orders from the HIS to the i800 via HL7.

What immunoassay tests does LISBridge extract from the Abbott i800?

All test codes reported by the i800 are extracted — TSH, fT3, fT4, LH, FSH, prolactin, HCG, PSA, AFP, CEA, CA-125, CA-19-9, troponin I, CK-MB, BNP, and others.

How do I configure the Abbott i800 to connect to LISBridge?

Configure the i800 host connection settings to point to your LISBridge machine's IP address and the TCP port set in LISBridge. LISBridge listens and accepts the connection automatically.

LISBridge supports 35 instruments. See also:

Sysmex XN-550Mindray BC-430Mindray BC-760COBAS C311COBAS E411Horiba Pentra XLRHoriba Pentra 400Horiba Yumizen H550View all 26+ →

Connect your Abbott i800 today

Start your free 7-day trial — no credit card required. Full ASTM E1394 support from day one.

Start Free TrialTalk to Us →